Vape Not Turning On
Having trouble getting your Vista Edge vape to turn on? You’re not alone. There are several common reasons why this might be happening, from a dead battery to a faulty connection. This guide will walk you through the most frequent issues and provide simple solutions to get your Vista Edge firing up again.
Battery Issues
One of the most common culprits behind a vape not turning on is a depleted battery. If your Vista Edge hasn’t been used in a while or has been heavily used, the battery could simply need a recharge. Ensure you are using the correct charger and cable that came with your device.
Another possibility is a faulty connection. Check to make sure the battery is properly inserted into the device and all connections are secure. Sometimes, a loose connection can prevent the vape from receiving power.
If you’ve ruled out these basic issues, there might be a problem with the firing button or internal circuitry. In this case, it’s best to contact Vista Edge customer support for further assistance.
Loose Connection Problems
Loose connections can often cause a vape to fail to turn on. Inspect the battery compartment and make sure the battery is inserted correctly and making good contact with the terminals.
Also, check the connection between the battery and the rest of the device for any signs of damage or loose wiring.
Faulty Button
A faulty firing button can be another reason why your Vista Edge vape isn’t turning on. The button might be physically stuck, have a broken internal connection, or simply be malfunctioning.
If you suspect the firing button is the issue, try gently cleaning it with a soft brush or cotton swab to remove any debris or residue. If that doesn’t work, it might be time to contact Vista Edge customer support for a replacement button.
Leaking Vape Juice
Leaking vape juice is a common problem that can be caused by a number of factors. It can be frustrating and messy, but luckily there are usually simple solutions to fix the issue.
Worn O-Rings
One of the most frequent culprits behind leaking is worn-out or damaged O-rings. These rubber rings create a seal around various components in your vape, preventing juice from escaping. Over time, O-rings can degrade due to exposure to heat, oils, and repeated use.
If you notice your Vista Edge leaking, inspect the O-rings on the mouthpiece, tank connection, and battery door for signs of wear, cracking, or deformation.
Overfilled Tank
An overfilled vape tank is another common cause of leaking. When the tank is too full, juice can overflow from the top, creating a mess and potentially damaging your device. To avoid this, always fill the tank to just below the maximum fill line indicated on the tank.
Incorrect Coil Installation
Incorrect coil installation can lead to a variety of issues, including leaking. Make sure you are installing the coils correctly and securely into the atomizer or tank.
A poorly seated coil may not make proper contact with the heating element or create an airtight seal, allowing e-liquid to leak out.
Poor Vapor Production
Poor vapor production can be a frustrating issue for any vaper. If your Vista Edge isn’t producing the clouds you desire, there are several potential culprits to investigate.
Clogged Coils
Clogged coils are a common reason for poor vapor production. Over time, e-liquid residue and burnt wick can build up on the coil, restricting airflow and reducing heat transfer. This leads to weaker vapor and a diminished vaping experience.
To address clogged coils, you should regularly clean or replace them. Cleaning involves removing the coil from the device and soaking it in a cleaning solution designed for vape coils.
Afterward, rinse thoroughly and allow it to dry completely before reinserting. If cleaning doesn’t resolve the issue, replacement is recommended as heavily soiled coils may be beyond repair.
Low Wattage Setting
Poor vapor production can also stem from a low wattage setting. The wattage determines the amount of heat applied to the coil, which directly affects vapor production.
- Ensure you are using the appropriate wattage for your chosen e-liquid and coil type.
- Experiment with gradually increasing the wattage in small increments until you achieve your desired vapor output. Be cautious as excessive wattage can overheat the coil and lead to burnt hits.
Expired E-Juice
Expired e-juice can significantly impact vapor production. Over time, the flavors degrade, and the chemical compounds in the e-liquid break down. This can result in a weaker, less flavorful vapor, or even no vapor at all.
To ensure optimal performance from your Vista Edge vape, it’s crucial to use fresh e-juice that hasn’t expired.
Burnt Taste
A burnt taste when vaping can be an unpleasant and sometimes concerning experience. It often signals a problem with your device or your vaping habits that needs addressing.
Dry Hitting
A burnt taste in your Vista Edge vape is usually caused by one of two main issues: a dry hit or overheating the coil.
Dry hits occur when you inhale without enough e-liquid being drawn into the atomizer. This causes the heating element to burn without any liquid to vaporize, resulting in that harsh, burnt taste.
Overheating the coil can also produce a burnt taste. If you vape at too high a wattage or for extended periods, the coil may get excessively hot and start to char the e-liquid, leading to a burnt flavor.
Coils Burning Out
One of the most common causes of a burnt taste is dry hits. This happens when you inhale without enough e-liquid being drawn into the atomizer, causing the heating element to burn without any liquid to vaporize.
Another cause is overheating the coil. If you vape at too high a wattage or for extended periods, the coil can get excessively hot and char the e-liquid, resulting in a burnt flavor.
Coils themselves can also burn out over time due to wear and tear, build-up of residue, or prolonged exposure to heat. This typically manifests as a reduced vapor production along with a burnt taste.
Other Issues
Beyond the common issues of battery life and loose connections, there are other potential problems that might cause your Vista Edge vape to malfunction. From faulty firing buttons to leaking juice, these issues can significantly impact your vaping experience.
Discolored Vape Juice
One such issue is discolored vape juice. This can be a sign of several underlying problems.
E-liquid that has turned brown or yellow could indicate oxidation. This happens when the e-liquid is exposed to air for prolonged periods, causing chemical reactions that change its color and flavor.
Another possibility is bacterial growth. If your vape juice bottle hasn’t been stored properly or if it’s contaminated, bacteria can multiply inside, leading to discoloration and a potentially harmful substance.
Lastly, some e-liquids naturally have a tendency to change color over time due to the ingredients used.
If you notice your vape juice has changed color significantly, it’s best to discard it and purchase fresh e-liquid.
Burning Sensation in Throat
A burning sensation in your throat when vaping can be caused by several factors. One common culprit is inhaling too hot of vapor. This can happen if your wattage is set too high or if you’re taking long, deep drags.
Another possibility is a dry hit. If you inhale without enough e-liquid being drawn into the atomizer, the heating element can burn without any liquid to vaporize, causing a harsh, burnt sensation in your throat.
Finally, using e-liquid with high levels of propylene glycol (PG) can also contribute to a burning sensation. PG is a thinner ingredient that can irritate the throat if inhaled in large amounts.
Order your new Vista Edge Series today
